Settings - Electrolux GA55SLIWE Benutzerinformation

Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:

6. SETTINGS

6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes and the display shows
the programme duration.
Water
1)
(l)
13 - 14
12.5 - 14.5
10 - 12
10
4
8 - 10
Energy
(kWh)
1.2 - 1.5
1.4 - 1.7
0.9 - 1.0
0.7
0.1
1.1 - 1.2
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously
Zeitvorwahl and Option until the
appliance is in programme selection
mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter user mode, press and hold
simultaneously Zeitvorwahl and Option
until the indicators
and flash and the display is blank.
6.2 The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
ENGLISH 9
Duration
(min)
150 - 160
175 - 190
70 - 80
30
14
225 - 235
, ,