WolfVision Visualizer VZ-9 Bedienungsanleitung Seite 7

Displaying live images
When the LIVE-link [LIVE] is clicked on the
start page, a live image from the Visualizer
is displayed. In addition the web browser
will also open a new window with a remote
control of the Visualizer.
Please note that JavaScript must be
enabled in order to see the live image.
Popups need to be enabled.
The frame rate of the live image is max.
3.75 frames per second. It depends on
the processing capacity of the PC, the
network environment, the number of
connected units etc.
Please note:
If the Visualizer is switched off while a live image is in display, the PC displaying the live image may
(depending on the web browser in use) continue the internal processing even if the web browser is closed.
Normally, this causes no problem. However, if this is repeated again and again, the operation of the host may
become unstable. In this case restart your PC.
Operation of remote control
When the LIVE-link [LIVE] at the Visualizer main page is clicked, a Live image is displayed and
also a new window with a remote control for the Visualizer will be opened.
Please note:
The CONTROL-page is only available, if the control function is activated in the Visualizer's on screen menu.
Displaying still images
When clicking the CAPTURE-link of the Visualizer start page, a still image with 1024x768 pixels
from the Visualizer is displayed. Using the CAPTURE-PREVIEW-link a still image with 512x384
pixels is displayed. These images can be saved with the save function of your web browser (In
Internet Explorer right-click on the image and use "Save image...").
All manuals and user guides at all-guides.com
6