WolfVision Visualizer VZ-9 Bedienungsanleitung Seite 10

Usage of Ethernet / LAN Software
All manuals and user guides at all-guides.com
In the browser window, the desired Visualizer can be
selected (all connected Visualizers are shown). When
more than one Ethernet connections are available, the
desired connection can be selected in the displayed
window.
With the discovery mode you can choose between local
network area (LAN) or Internet. With Internet selection,
the respective IP-address has to be entered (contact
your network administrator).
Please note:
If a Visualizer is behind a firewall and should be discovered over
the internet, the following ports should be allowed for
communication on the firewall: 50913 and 50914 for UDP/TCP
traffic.
When one or more Visualizers will be detected that are
not in the computers network IP address range, a
message will appear "Unreachable Visualizer found".
If you want to use these Visualizers as well, please talk
to your network administrator or the change the IP
address of the according devices to be in the IP address
range of the current network.
9