Status Information; E-Mail Notification - WolfVision Visualizer VZ-9 Bedienungsanleitung

Status Information

On Status information page, the current
state of the Visualizer can be checked.
Available information:
- Device Information like serial number,
Visualizer model, installed firmware
version
- Ethernet-settings like Mac-address, IP-
address, subnet mask and standard
gateway
- Operating hours
- Lamp status
- Power / Light settings
- Output resolution
- Image configuration like Detail, Focus,
Iris, Key-Lock, OSD-Menu, etc.
Please note:
On Professional and Ceiling Visualizers the
Status Information feature is available since
Firmware version v1.30a from March 2006. All
VZ-9 Visualizer models also support this
feature.

E-Mail Notification

WolfVision Visualizers offer the possibility of E-
Mail notification.
On E-Mail Settings you can define up to 3
recipients.
Alarm Email:
for i.e. a lamp is blown, the Visualizer sends an
E-Mail to the registered recipients automatically.
Startup Email:
every time, the Visualizer is switched on, it
sends an E-Mail to the recipients.
Weekly Status Report:
The Visualizer sends every week an E-Mail with
the current state. The week begins when the
Visualizer is connected to mains (mains switch
on, if available).
Please note:
E-Mail notification is a new feature introduced with
Firmware v1.30a in March 2006. Older units may need
a Firmware Update for this feature. VZ-9 Visualizers
support this feature starting with serial number 095501
(manufactured after March 2006).
All manuals and user guides at all-guides.com
support@wolfvision.com
xxx.xxx.xxx.xxx
Visualizer@wolfvision.com
5