Masterpro Power Duo BGMP-9155-BK Bedienungsanleitung Seite 28

EN
1. To copy the settings from cooking zone 1 to cooking zone 2, press the DUAL
button (15).
2. If using a different setting, use the button 2 to display the setting mode for
cooking zone 2. Then choose a program and make adjustments as needed.
8. If you have selected different settings for each cooking zone, but the cooking times
should end at the same time, press the MEAL button (12). If not, skip this step.
9. Use the START/STOP button (17) to start the cooking process.
If the MEAL function has been selected, the cooking zone with the longer cooking time
will begin cooking first. The other cooking zone is only activated, after a beeping sound,
when the remaining cooking times for both cooking zones are the same length. Until
then, a "hold" alert will appear on the associated display.
The remaining cooking time will be shown on the display (13 or 14). Once the cooking
time has ended, you will hear a beep and the word "End" will appear on the display.
10. Pull out the drawer(s) and place on a heat-resistant surface. Do not put them on the
device!
11. Switch off the device using the POWER button and pull the mains plug out of the
plug socket.
12. Remove the food from the drawer(s).
13. Allow the drawer and the rack to cool down, then clean them (see the "Cleaning and
Storage" section).
Pausing the Cooking Process
If you need to pause the cooking process, for example to mix the food or add more
ingredients, simply pull out the drawer (3). The cooking time countdown (for both
cooking zones if they are synchronised) will stop. It resumes after the drawer is inserted
back in again.
Manually Stopping a Cooking Zone
To stop the cooking process in one cooking zone, select setting mode using buttons
1 (20) or 2 (18) and then press the START/STOP button (17). "End" will appear on the
corresponding display, signalling that it has stopped. The other cooking zone will
continue the cooking process.
28