EuroLite TMH BSW-380 Moving-Head Beam/Spot/Wash Bedienungsanleitung Seite 36

Setting
Run Mode
DMX mode
This mode allows the unit to be controlled via any standard DMX controller.
Auto mode (Auto 1-4)
With this function, you can run 4 different internal programs.
Random auto mode
With this function, you can run the random internal program.
Sound
With this function, you can run the internal program sound-controlled.
Auto mode with special PAN/TILT movement
With this function, you can run 4 internal programs (F-sleep 8, F-stand 8, Forward 0 and Draw up 8) with
special PAN/TILT movement
DMX address setting
With this function, you can adjust the desired DMX address via the Control Board.
Number of DMX channels
With this function, you can select the desired DMX channel mode.
Automatic display reverse
With this function, the display automatically rotates by 180°.
Invert PAN
With this function, you can reverse the PAN-movement.
Invert TILT
With this function, you can reverse the TILT-movement.
PAN-TILT Swap
With this function, you can swap PAN and TILT.
PAN-TILT Encoder / automatic PAN/TILT correction (Feedback)
With this function, you can correct the PAN/TILT movement to the programmed position.
No DMX signal / action if no DMX
With the function, you can "keep" or "clear" the DMX value if there is no DMX-signal.
Display / display turn off
With this function, you can adjust the display characteristics when the buttons are inactive:
ON - Shuts off the display after 10 seconds
OFF - Display always on.
Lamp on by power on
With this function you can select if the lamp will be switched on when switching the power on. Select "ON"
by pressing Up or Down if you wish to enable this function or "OFF" if you don't.
Linear color / switch color change from step to linear color
With this function, you can select the linear change of the color wheel.
Load default
With this function, you can restore the factory settings of the device. All settings will be set back to the
default values (shaded).
Manual
Test function of each channel
With this function you can test each channel on its (correct) function.
36/44 00138311, Version 1.0