Engine Oil; Engine Cylinder - Honda WH15XT Bedienungsanleitung

STORAGE

Engine Oil

Change the engine oil (see page 35).

Engine Cylinder

1.Remove the spark plug (see page 39).
2.Pour a teaspoon (5 cm
3.Pull the starter grip several times to distribute the oil in the cylinder.
4.Reinstall the spark plug.
5.Pull the starter grip slowly until resistance is felt and the notch on
the starter pulley aligns with the hole at the top of the recoil starter
cover. This will close the valves, so moisture cannot enter the engine
cylinder. Return the starter grip gently.
44
3
) of clean engine oil into the cylinder.
Align the notch on the pulley with
the hole at the top of the cover.