Before Operation; Are You Ready To Get Started; Is Your Pump Ready To Go - Honda WH15XT Bedienungsanleitung

BEFORE OPERATION

ARE YOU READY TO GET STARTED?

Your safety is your responsibility. A little time spent in preparation will
significantly reduce your risk of injury.
Knowledge
Read and understand this manual. Know what the controls do and how
to operate them.
Familiarize yourself with the pump and its operation before you begin
pumping. Know how to quickly shut off the pump in case of an
emergency.
Be sure of what you are pumping. This pump is designed to pump only
fresh water that is not intended for human consumption.

IS YOUR PUMP READY TO GO?

For your safety, to ensure compliance with environmental regulations,
and to maximize the service life of your equipment, it is very important
to take a few moments before you operate the pump to check its
condition. Be sure to take care of any problem you find, or have your
servicing dealer correct it, before you operate the pump.
To prevent a possible fire, keep the pump at least 1 meter (3 feet)
away from building walls and other equipment during operation. Do not
place flammable objects close to the engine.
Before beginning your pre-operation checks, be sure the pump is on a
level and firm surface with the ignition switch in the OFF position.
Failure to properly maintain this
pump, or failing to correct a problem
before operation, could result in a
significant malfunction.
Some malfunctions can seriously
hurt or kill you.
Always perform a pre-operation
inspection before each operation and
correct any problems.
17