Blumfeldt Flagranti Plus Bedienungsanleitung Seite 43

If the problem is:
Emitter glows uneven .
Note: Bottom 2.5cm of
emitter normally does not
normally glow.
Carbon build-up
Thick black smoke
And this condition exists:
Gas pressure is low
Base is not on a level
surface
The appliance is not level
Dirt or film on reflector
and emitter
Blockage in burner
Then do this:
Replace gas cylinder
Place the appliance on a
level surface
Level the appliance
Clean reflector and emitter
Turn control knob to
"OFF", let it cool to room
temperature and remove
blockage and clean burner
inside and outside.
EN
43