Eibenstock ERC 300 Originalbetriebsanleitung Seite 21

B
Let the machine run for a short period of time and in a safe position. If
the machine does not run easily, stop working immediately.
Care and Maintenance
Before the beginning of the maintenance or repair works
you have to disconnect the plug from the mains!
Repairs may be executed only by appropriately qualified and experienced
personnel. After every repair the machine has to be inspected by an electric
specialist. Due to its design, the machine needs a minimum of care and
maintenance. However, the following points always have to be observed:
Always keep the power tool and the ventilation slots clean.

During work, please pay attention that no particles get inside the

machine.
In case of failure, a repair has to be carried out by an authorised

service workshop.
Our after-sales service responds to your questions concerning
maintenance and repair of your product as well as spare parts.
EIBENSTOCK's application service team will gladly answer questions
concerning our products and their accessories.
Environmental Protection
Raw material recycling instead of waste disposal
To avoid damages on transportation, the power tool has to be delivered in a
sturdy packing. Packaging as well as unit and accessories are made of
recyclable materials and can be disposed accordingly.
C
A
E
20
D