Eibenstock ERC 300 Originalbetriebsanleitung Seite 19

3
4
5
Load the pipe to be cut.
Switch on the machine (continuous operation). Loosen the locking bolt (4)
and dip into the tube with the cutting and beveling disc. Now turn the pipe at
moderate speed in the direction of the arrow until the pipe is completely cut.
Caution!
Do not reach into the rotating disc.
1
Connect an industrial vacuum cleaner
to the provided suction socket (4).
Connect the machine to the socket of
the vacuum cleaner and switch the
vacuum cleaner to automatic operation.
Swivel the machine arm upward and
lock it in place using the locking pin (5).
18
2