Hyundai WS 2266 Bedienungsanleitung Seite 30

6.3 Barometric Trend Pointer
The trend pointer displayed on the LCD (A1) indicates the trend of the Barometric pressure.
Indicating the barometric
pressure trend is rising
7. THERMOMETER
7.1 RF Transmission Procedure:
• The main unit automatically starts receiving transmission from outdoor thermo sensor for
outdoor temperature after weather condition setting.
• The thermo sensor unit will automatically transmit temperature signal to the main unit after
batteries inserted.
• If main unit failed to receive transmission from outdoor thermo sensor in first 3 minutes after
power up ("- - . –"display on the LCD), hold "RF SEARCH" button for 3 seconds to receive
transmission manually.
7.2 Temperature& Humidity
(1) Celsius / Fahrenheit
• Press "▼" button (B6) to select Indoor/Outdoor Temperature in Celsius mode or Fahrenheit
mode.
• If the temperature is out of the measurable range, LL.L (beyond the minimum temperature) or
HH.H (beyond the maximum temperature) will be shown on the LCD.
(2) Maximum/Minimum Temperature & Indoor Humidity Recording Function:
• Press "MAX/MIN" button (B8) to show the maximum recorded Indoor Outdoor Temperature
and Indoor Humidity. "
• Press "MAX/MIN" button (B8) again to show the minimum recorded Indoor/Outdoor Temperature
and Indoor Humidity. "
• When viewing maximum or minimum record, hold "MAX/MIN" button to clear minimum and
maximum temperature & humidity record.
(3) Outdoor Temperature Alert Function
• Press "OUTDOOR TEMP ALERT" button to select to activate or deactivate outdoor tempera-
ture alert function.
• Press ALERT button select to:
- Active outdoor upper temperature alert, the icon "
would display.
- Active outdoor upper& lower temperature alert, the icon "
perature digit would display.
- Active outdoor lower temperature alert, the icon "
would display.
- Deactivate outdoor temperature alert, alert icon disappear.
• Hold "ALERT" button for 3 seconds to enter outdoor temperature alert setting. Icon "
" besides outdoor temperature's digits flash. Press "▲"or "▼" button to adjust the setting
value, press "ALERT" to confirm the setting. Setting sequence as follow: Upper limit of tempe-
rature, Lower limit of temperature.
• When it's alert, the corresponding icon "
buttons to stop the alert sound.
Indicating the barometric
pressure trend is steady
" is shown on the LCD.
" is shown on the LCD.
" or "
EN - 30
Indicating the barometric
pressure trend is falling
" besides outdoor temperature digit
" besides outdoor tem-
" besides outdoor temperature digit
" would flash on the LCD. Press any
" or "