7.2 Manual Time Setting:
•
Hold "MODE" button for 3 seconds to enter Clock/Calendar setting mode.
•
Press "+" or "-" button to adjust the setting and press "MODE" button
to confirm each setting.
•
The setting sequence is shown as follow: Weather forecast, RCC ON/OFF, Time Zone,
12/24Hour, Hour, Minute, Weekday language, Year, Month-Day Sequence, Month, Day,
Temperature Unit
•
10 languages can be selected in Day-of-week, they are: German (GE), English(EN),
French(FR), Italian(IT), Dutch(NE), Spanish(ES), Danish(DA), Czech(CZ), Russian(RU),
Norwegian (NO)
•
The Time zone is used for the countries where can receive the DCF time signal but the time
zone is different from the German time.
•
When the country time is faster than the German time for 1 hour, the zone should be set
to +1. Then the clock will automatically set 1 hour faster from the signal time received.
Note:
The Time Setting Mode will automatically exit in 15 seconds without any adjustment.
7.3 Daily Snooze Alarm Function:
•
Press "MODE" button to select to view:
•
When viewing the Alarm Time, hold "MODE" button for 3 seconds to enter Alarm Time
setting. Press "-" or "+" button to adjust the alarm time. Press "MODE" button to confirm the
setting.
•
Press "ALARM ON/OFF" button to switch alarm on or off. If it is on, "
•
When Alarming, press "SNOOZE" button to activate the snooze alarm, ("
LCD). The alarm will snooze for 5 minutes, then it alarms again. This snooze function can
be enabled for maximum 7 times.
•
Except "Snooze" button, press any buttons to stop the snooze alarm.
8. MOON PHASE DISPLAY
Moon phase display would be changed base on the changing in date.
9. BACKLIGHT
Press "DIMMER" button to select the brightness of display.
10. LOW BATTERY INDICATION:
The low battery icon "
The batteries should be replaced.
Time
Alarm Time ("AL" Shown on the LCD)
" will appear indicating thermo sensor is in low battery status.
ENG - 28
" show on the LCD.
" flash on the