Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TIME DISPLAY THROUGH RADIO CONTROL
This device is equipped with a receiver able to receive the time signal of the Physikalisch
Technische Bundesanstalt Braunschweig (central Germany) admissible in a 1500 km radius.
Press and hold the DOWN button (15) of the weather station, the symbol (9) will flash radio
control and within 24 hours will be displayed on the control radio time signal.
Note 1: When the symbol of the blinking control radio is displayed you can not make
any manual adjustments.
Note 2: When the symbol is steady it means that the signal 'was properly received.
Note 3: The time is transmitted from the central Germany, so if we are in a country with different
time than the Germany is necessary to set the time zone.
Note 4: Place the weather station away from equipment that generates magnetic fields such
as mobile phones, televisions etc ....
It not in all areas of Europe may be able to receive the signal of the radio control. In this case
you must set the time manually.
SETTING THE CLOCK MANUAL
1) Press and hold the SET button (13) to enter the manual clock setting.
2) Set the time zone of your region through the UP (14) or DOWN (15). You can choose
between -1, 0, +1 (UTC correction)
3) Press the SET button (13), the display will star t flashing in the time display 12/24 hours.
4) Set the time display in 12/24 hours via the UP (14) or DOWN (15).
5) Press the SET button (13), the display will begin to flash hours.
6) Set the hours with UP (14) or DOWN (15).
7) Press the SET button (13), the display will begin to flash the minutes.
8) Set the minutes using the UP (14) or DOWN (15).
9) Press the SET button (13), the display will star t flashing year.
10) Set the year using the UP (14) or DOWN (15).
11) Press the SET button (13), the display will begin to flash the month.
12) Set the month using the UP (14) or DOWN (15).
13) Press the SET button (13), the display will star t flashing on the day.
14) Set the day using the UP (14) or DOWN (15).
15) Press the SET button (13), the display will star t flashing the date format.
16) Set the date format via the UP (14) or DOWN (15).
17) Press the SET button (13), the display will begin to flash duration in minutes of the Snooze
function.
18) Set the duration of the snooze function (5 min - 60 minutes) through the UP (14) or DOWN
(15).
19) Press the SET button (13) to finish the manual clock setting.
SETTING THE ALARM
1) Press the SET button (13) to display the Alarm 1 (A1). Press it again to view the Alarm 2
(A2). Press it again to return to display the current time.
2) While viewing A1 or A2 hold the SET button (13), on the display the alarm time star ts to
flash.
3) Press the UP (14) or DOWN (15) to adjust the hour.
4) Press the SET button (13), on the display the alarm minutes star t flashing.
5) Press the UP (14) or DOWN (15) to adjust the minutes.
6) Press the SET button (13) to end the alarm setting.
EN - 18
Werbung
Inhaltsverzeichnis
