Technical Details; Technical Specifi Cations - Bloom Diagnostics Bloom Lab Bedienungsanleitung

13. Technical details

13.1. Technical specifi cations
EN
Power supply
Size
Weight
IP class
Environmental
Communication
Firmware Version
End of life
The Bloom Lab complies with the electromagnetic interference requirements of EN 61326-2-6:2013 and EN 61326-1:2013.
Further, it complies with the particular requirements for electromagnetic compatibility for medical devices according to EN
60601-1-2 (see Table N°5 for immunity and emission levels).
Caution: Portable RF communications equipment (including peripherals such as antenna cables and external antennas)
should be used no closer than 30 cm (12 inches) to any part of the Bloom Lab, including cables specifi ed by the manufac-
turer. Otherwise, degradation of the performance of this equipment could result.
The Bloom System should be used in a home or professional healthcare environment.
Emission
Test
Conducted emission
Radiated emission
Harmonic current emission
Voltage fl uctuations and fl icker
12
100-240VAC. (50/60Hz) / 5VDC, 1.5A via USB-C
100x100x135mm (WxLxH)
560g
IP51 (dust and dripping water protected)
+15°C to +40°C (Measurement)
-20°C to +60°C (Storage)
<80% Relative Humidity
Bluetooth Low Energy 4.2
Module Type Class 2
NFC , ISO/IEC 14443A compliant, 106 kbps transmission rate
1.1.x
5 years
Table N°4: Technical specifi cation
Limits
CISPR 11, Group 1, Class B
CISPR 11, Group 1, Class B
IEC 61000-3-2, Class A, power < 75W
IEC 61000-3-3
4-3-6-2 Bloom Lab IFU, 09.04.2020, V1.0