Connecting To A Tv With An Aerial Input - Sony SCPH-30004 Bedienungsanleitung

a TV set
Connecting to a VCR
Connect your PlayStation 2 console to your
®
VCR using the supplied AV cable (integrated
audio/video) matching the plug colours to the
jacks on the VCR.
If your VCR is monaural, do not connect the
red plug.
However, when playing a DVD video, do not
connect the console to a VCR. If you do, the
colour is disturbed. Connect the console
directly to the TV.
After connecting
Set your TV and VCR adjustments
appropriately. Refer to the instruction manuals
for your TV and VCR.
Connecting to a TV with an S VIDEO input connector
Connect your PlayStation 2 console to the
®
S VIDEO input connector on the TV using the
SCPH-10060 S VIDEO cable (sold separately)
E
for a higher quality picture.
After connecting
Set your TV to the appropriate video input
mode (such as "S VIDEO").
To S VIDEO input
To audio input (left)

Connecting to a TV with an aerial input

Connect your PlayStation 2 console to the
®
aerial input on the TV using the SCPH-10072
RFU adaptor (sold separately). In this case, the
sound will be monaural.
After connecting
Tune your TV to channel 36.
When playing a DVD video
VCR TV
PlayStation 2
®
console
Connect directly
To AV MULTI OUT
connector
To audio input (right)
C
To aerial input To AV MULTI OUT
connector
Connecting to a TV with a Euro-AV Connector using the Euro-AV
Connector Plug
Connect your PlayStation 2 console to the
®
Euro-AV connector (SCART) on the TV using
the Euro-AV connector plug and AV Cable
(integrated audio/video), making sure you
match the colour-coded plugs of the AV Cable
to the matching jacks of the connector plug.
After connecting
Set your TV to the appropriate video input
mode. Refer to the instruction manual of your
TV.
Connecting to a TV with a Euro-AV connector using the Euro-AV Cable
You can improve picture quality by using the
Euro-AV Cable SCPH-10142 (sold separately).
Connect your PlayStation 2 console to the
®
Euro-AV Connector on the TV.
After connecting
Set your TV to the appropriate video input
mode. Refer to the instruction manual of your
TV.
Note
Euro-AV cable supports the video output of PlayStation
and PlayStation format software only.
®
Important!
When viewing DVD videos on your PlayStation 2, use
®
another cable which supports PlayStation 2 format video
®
output, for example AV cable (integrated audio/video),
RFU adaptor or S VIDEO cable.
When turning on the console for the first time
The initial setup screen appears.
Set "Language," "Time Zone" and "Daylight Savings Time
(Summer Time)" according to the instructions on the
screen.
Settings can be adjusted later in the system configuration
menu. For details, see "Using the system configuration
menu" on page 7.
To Euro-AV
Connector
To AV MULTI OUT
connector
To AV MULTI OUT
To Euro-AV
connector
Connector
2
®
C
5
GB