Backlight; Factory Reset; Sw Version - Essentielb RRV-300DAB+ Bedienungsanleitung

Backlight

You can use this menu item to configure the backlight of your clock radio's LCD screen.
The following settings are available:
Setting
Set the period of time after which the backlight automatically turns
off. The available options are: On (never turns off), 10 sec, 20 sec,
30 sec, 45 sec, 60 sec, 90 sec, 120 sec, and 180 sec.
Notes:
Timeout
●
This setting takes effect only when your clock radio is in the audio
mode.
●
When the backlight is off, you can hardly see anything displayed
on the screen.
Set the LCD screen's brightness level to Low, Medium, or High.
On level
Tip: You can also adjust the screen's brightness by pressing the

Factory reset

You can use this menu item to restore your clock radio to its factory default settings and
clear all DAB and FM radio stations stored in the memory.
Notes:
●
After a factory reset, your clock radio will restart and allow you to set it up as new.
●
You cannot reverse a factory reset.

SW version

You can use this menu item to view your clock radio's currrent software version. When
reporting an issue with your clock radio to us, please find out and tell us your clock
radio's current software version.
Description
button.
69
V.1.0