Turning On Your Clock Radio For The First Time - Essentielb RRV-300DAB+ Bedienungsanleitung

clock radio tunes in to the last DAB station you tuned it to.
3. Tune your clock radio to your desired DAB station. See the sections below for more
information.
While listening to digital radio, you can:
●
Press the and
clock radio.
●
Press the
-
Signal Strength: The signal strength of the current station shown using a bar.
-
Program Type (PTY): A description of the type of program provided by the DAB+
station or broadcaster.
-
Multiplex Name: The multiplex that is broadcasting the program you are listening
to.
-
Frequency: The transmission frequency of the station you are listening to.
-
Signal error data: The signal error data of the current program.
-
Digital bit rate: The digital bit rate and the signal mode.
-
Program format: The program type of the current program.
-
Time: The current time provided by the broadcaster.
-
Date: The current date provided by the broadcaster.
-
Dynamic Label Segment (DLS): DLS is the scrolling text information supplied
by the DAB+ station or broadcaster. Note that some programs may not provide
DLS info.
For optimal reception of digital radio stations, you must fully extend your clock
radio's antenna.

Turning on your clock radio for the first time

When you turn on your clock radio for the first time, it automatically enters the audio
mode and sets its input source to DAB. Then it starts an automatic search for the
available stations. During the search, its displays a progress bar to indicate the progress
of the search and the number of stations found so far.
54
V.1.0
buttons to adjust the volume. Press the
button repeatedly to cycle through the following types of information:
button to mute your