Performing A Manual Search - Essentielb RRV-300DAB+ Bedienungsanleitung

Performing a manual search

If you know the frequency of a station, you can find it using a manual search. Using this
function, you can select a specific DAB channel/frequency and then manually adjust the
attenna and/or the location of your clock radio, to obtain the optimal reception for that
channel/frequency in your location.
To perform an manual search, follow the steps below.
1. Long press the
2. Press the or
the button.
3. Press the or
from 5A to 13F. Press the
-
You will see a row of solid boxes at the bottom of the screen, which indicates
the actual signal strength that you are receiving. The stronger the signal, the
further to the right the row of solid boxes will be. An empty box
between the solid boxes indicates the minimum signal strength for acceptable
listening.
-
Your clock radio will automatically search for all available stations on the current
DAB channel and save them to the station list.
-
Note: If you see only an empty box
receiving any signal at all for that particular DAB channel in your area.
4. Adjust the attenna and/or the location of your clock radio to obtain the maximum
signal strength.
5. To perform another manual search, press the
above.
6. Press the
Note: Your clock radio will not play any station during a manual search.
56
V.1.0
button.
button until the Manual tune option appears and then press
button to cycle through the DAB channels, which are numbered
button when the desired DAB channel appears.
button exit the manual search.
at the bottom of the screen, you are not
button and repeat Steps 3 and 4
that appears