Disconnecting A Bluetooth* Playback Device; Using Your Clock Radio As A Wired Speaker - Essentielb RRV-300DAB+ Bedienungsanleitung

When the call ends, your clock radio will resume the playback from where it left off.

Disconnecting a Bluetooth* playback device

To disconnect a Bluetooth* playback device from your clock radio, use one of the
methods below:
●
Long press the
●
On your Bluetooth* playback device, find "Essb_RRV-300DAB+" on the list of paired
Bluetooth* devices and choose to disconnect it.
●
On your Bluetooth* playback device, turn off Bluetooth*.
After disconnecting a Bluetooth* playback device, your clock radio will reenter pairing
mode and you can follow the same steps described above to pair it with another
Bluetooth* playback device.

using your clock radio as a wired speaker

1. Put your clock radio into the audio mode if it is not in this mode.
2. Press the button one or more times until "LINE IN (Auxiliary Input)" appears on
the screen.
3. Using a 3.5 mm audio cable (not included in the package), connect a playback
device such as an MP3/MP4 player to the AUX jack on the back of your clock radio.
4. Select and play audio on the playback device.
5. Press the and
clock radio.
62
V.1.0
button on your clock radio.
AUX
DC 5V
buttons to adjust the volume. Press the button to mute your