Maintenance Instructions - Vlano BRION Black Handbuch

MAINTENANCE INSTRUCTIONS

Attention! Before cleaning the extractor hood, disconnect it from the electricity.
•
Use a damp cloth soaked in warm water with a neutral detergent for external cleaning of the painted
extractor hood.
•
Never use abrasive detergents, coarse sponges or detergents containing soda, acid, chlorides or
solvents to clean the extractor hood.
•
When cleaning, avoid getting moisture on the current-carrying parts of the extractor hood, and wipe
the surfaces with a soft cloth after washing.
•
The aluminum filter, holding oil and dust from the air, is clogged and should be washed after being
soaked in hot water with an effective detergent once every 1.5 to 2 months. Changing the color of
the filter after washing does not affect the quality of its work.
•
To remove the aluminum filter, press the spring latch and remove the filter from the panel. Install the
filter in reverse order (Pic. 6).
•
Do not install the filter after washing until it is completely dry.
•
The carbon filters, used during recirculation mode should be changed every 3-6 months depending
on the extractor hood use. Filters are installed on the T-like stab of the cover of the turbofan by axial
pushing and clockwise rotation.
•
LED lamps are installed on the extractor hood for lighting the working area of the cooker. Before
starting lighting lamps substitution, disconnect the extractor hood from electricity, and leave the
lamps to cool. To replace the lamp, remove the aluminum filters, push the holder of the cartridge so
that the lamp came out of the body of the extractor hood and remove it by turning it counterclockwise.
Replace it with the new one with the same characteristics and install filters (Pic. 7).
Pic. 6
Picture 6. Aluminum filter removing
•
To change the carbon filter, you must follow the next steps (Pic. 8): Put the carbon filter on the
lock as far as it will go on both sides. Rotate the carbon filter in any direction at an angle of 90 °
to ensure that it is fixed.
Pic. 7
Picture 7. Replacement of the lighting lamp.