Maintenance Instructions - Vlano SLIDE Handbuch

MAINTENANCE INSTRUCTIONS

Attention! Before cleaning the extractor hood, disconnect it from the electricity.
•
Use a damp cloth soaked in warm water with a neutral detergent for external cleaning of the painted
extractor hood.
•
Never use abrasive detergents, coarse sponges or detergents containing soda, acid, chlorides or
solvents to clean the extractor hood.
•
When cleaning, avoid getting moisture on the current-carrying parts of the extractor hood, and wipe
the surfaces with a soft cloth after washing.
•
The aluminum filter, holding oil and dust from the air, is clogged and should be washed after being
soaked in hot water with an effective detergent once every 1.5 to 2 months. Changing the color of
the filter after washing does not affect the quality of its work.
•
To remove the aluminum filter, press the spring latch and remove the filter from the panel. Install the
filter in reverse order (Pic. 6).
•
Do not install the filter after washing until it is completely dry.
•
The carbon filters, used during recirculation mode should be changed every 3-6 months depending
on the extractor hood use. Filters are installed on the T-like stab of the cover of the turbofan by axial
pushing and clockwise rotation. (Pic. 7).
Pic. 6
Pic. 7