Vlano BRION Black Handbuch Seite 27

EXTRACTOR HOOD INSTALLATION INSTRUCTIONS
•
Select the operation mode and place for installation of the extractor hood
•
Remove the extractor hood from the packaging.
•
Check the extractor hood, connect it to the electric network and check all its functions.
•
Make marks for the mounting holes of the body on the wall. To do this, put the paper mold with
markings of the 4 holes in the back wall of the body (points A, B, C, D, see the installation scheme),
put the mold to the wall on the needed height indicated above, and align it on the level.
•
Mark and drill holes in points A, B, C, D with drill Ø7mm 40mm in depth.
•
Install the dowels in the perforated holes and turn in four screws PTG 4,5x40 through the holes in
the mounting bracket.
Рic.3
Pic.4