Deltaplus TC007 Bedienungsanleitung Seite 15

correct functioning of the product (as well as all your
equipment) and thus your safety.
Clean the product with a brush under running cold water of
domestic supply. If the stains persist, clean it in warm water
(maximum 30 °C) with ordinary soap. Then rinse thoroughly,
wipe it with a towel and dry naturally in a shaded ventilated
place away from sources of heat.
If needed, lube sparingly the moving joints of the cam and
handle with silicon based oil.
Temperatures
While it is permissible to use this product within the temperature
range from -20 °C to +60 °C, it is advisable to stock it in a dry
place at room temperature.
Lifetime
It is impossible to indicate the exact lifetime of this product for it
depends on the frequency and mode of application, on the
environment where it is used (marine, cave, corrosive
atmosphere) and on mechanical wear or damage. Provided its
correct use (in accordance with these instructions), the lifetime
of the product on average use is expected to be 7 years.
Guarantee and its limitations
This product is guaranteed for 3 years from purchase against
any faults in materials or manufacture. The guarantee does not
apply in cases of misuse, normal wear and tear, unauthorised
modifications or alterations, improper use, improper
maintenance, accidents, negligence, damage or if the product
is used for a purpose it was not designed for. If you discover a
defect, you should return the product to the reseller you
purchased the product from or directly to DELTA PLUS
GROUP.
DELTA PLUS GROUP is not responsible for the
consequences of direct, indirect, accidental or any
other type of damage resulting from the use of its
products.
The declaration of conformity can be found on the
website www.deltaplus.eu in the data of the product.