Clean The Filter; Clean The Brick Carrier Cart Rails; Tension / Change Of V-Belt - Zipper Maschinen ZI-ZSM600 Betriebsanleitung

16.2.3

Clean the filter

16.2.4

Clean the brick carrier cart rails

16.2.5

Tension / change of V-belt

ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
• The filter, especially the filter screen (1), must
be cleaned regularly to remove accumulated
sediments, etc.
• To do this, loosen the screws (2) to dismantle
and clean the outer filter (1).
• Then clean the inner filter (3).
• Remove dirt and debris from the guide rails
(1).
• Loosen the two screws (2, 3) of the V-belt
cover (1) and remove the V-belt cover.
35
ZI-ZSM600