Put on your personal protective equipment before working on the machine.
12.3
Safety devices
The machine is equipped with the following safety devices:
12.4
General safety instructions
To avoid malfunctions, damage and health impairments when working with the machine, the following
points must be observed in addition to the general rules for safe working:
•
Check the machine for completeness and function before starting. Only use the machine if
the separating and other non-separating protective devices required for machining have are
fitted.
Make sure that the guards are in good working order and properly maintained.
•
Select a level, vibration-free surface as the installation area.
•
Ensure sufficient space around the machine!
•
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
•
Ensure a clean working environment.
Keep the area around the machine free of obstacles (e.g. dust, cut parts, etc.).
•
Only use tools that are in perfect condition and free of cracks and other defects (e.g. defor-
•
mations).
•
Remove tool keys and other adjustment tools before switching on the machine.
Check the machine's connections for strength before each use.
•
Never leave the running machine unattended. Switch off the machine before leaving the
•
working area and secure it against unintentional or unauthorised recommissioning.
•
The machine may only be operated, maintained or repaired by persons who are familiar and
who have been informed about the dangers arising from this work.
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
A self-locking Emergency Stop button to stop dangerous
movements at any time.
Safety guard (fixed): The saw blade guard is used to avoid
touching the saw blade.
Safety guard (fixed): To avoid contact with the saw blade.
Safety guard (fixed): To avoid contact with the saw blade.
SAFETY
25
ZI-ZSM600