Preface (En); Customer Service Address - Zipper Maschinen ZI-ZSM600 Betriebsanleitung

11

PREFACE (EN)

Dear Customer!
This manual contains information and important notes for safe commissioning and handling of the brick
cutting machine ZI-ZSM600, hereinafter referred to as "machine" in this document.
This manual is part of the machine and must not be removed. Save it for later reference and if
you let other people use the machine, add this manual to the machine.
Please pay special attention to the chapter Safety!
Before first use read this manual carefully. It eases the correct use of the machine and prevents misun-
derstanding and damages of machine.
Due to the constant further development of our products, illustrations and contents may differ slightly. If
you notice any errors, please inform us.
We reserve the right to make technical changes!
Check the goods immediately after receipt and make a note of any complaints on the consignment note
when the delivery person takes them over!
Transport damage must be reported separately to us within 24 hours.
ZIPPER MASCHINEN GmbH cannot accept any liability for transport damage not noted.
Copyright
© 2022
This documentation is protected by copyright. All rights reserved! In particular the reprint, the translation
and the removal of photos and illustrations will be prosecuted.
The place of jurisdiction is the regional court Linz or the court responsible for 4707 Schlüsslberg is valid.

Customer Service Address

Z.I.P.P.E.R MASCHINEN GmbH
AT-4707 Schlüsslberg, Gewerbepark 8
Tel 0043 (0) 7248 61116 – 700
info@zipper-maschinen.at
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
PREFACE (EN)
23
ZI-ZSM600