Risks And Hazards When Working With The Stone Cutting Machine - Zipper Maschinen ZI-FS115 Betriebsanleitung

 Warning signs and / or labels on the machine that are illegible or removed shall be replaced
immediately !
 The device may only be operated by persons who have read and understood the present
instructions in detail.
 The appliance must not be operated by persons who are not adequately trained or are in a
precarious state of health.
 Perform a visual inspection prior to each use of the device. Do not use the device if the safety
devices are damaged or worn. Never use the safety devices
 Use the equipment only at the prescribed in these instructions for use.
 Never leave the appliance unattended.
 If you interrupt your work, please store the unit in a safe place.
 Do not use electric tools near flammable liquids or gases.
 Do not switch the device on when it is flipped or not it is in the working position.
 Keep the unit away from other people, especially children and away from pets.
 Do not touch the tool or extension cord other people.
 Unplug the power cord after use and check the machine for damage.
 If you are not using it , store it in a dry and away from children.
 The mains voltage must match the voltage specified on the nameplate.
 Repairs may only be carried out by a qualified electrician.
 Before using the machine and after any impact which , check it for signs of wear or damage ,
and let you perform necessary repairs.
 Use never spare parts and accessories that are not provided or recommended by the
manufacturer.
 Use only in daylight or with adequate artificial lighting. Machine
 Maintain tools with care. Keep clean your tools to work well and safely.
 Regularly inspect the plug and cord and have it replaced if damaged this by a recognized
expert.
 Inspect extension cords periodically and replace damaged cables by a professional.

11.2.1 Risks and hazards when working with the stone cutting machine

 Contact with the rotating diamond saw blade will cause serious injury.
 Work with the tile cutter without hearing protection leads to hearing damage and temporary or
permanent loss of hearing. Wear one for health and safety regulations hearing protection to
limit the noise pollution.
 If the unit or the power cord is visibly damaged, the unit must not be put into operation.
 If the power supply cord of this appliance is damaged, it must be replaced by the manufacturer
or a qualified electrician.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-FS115
.
SAFETY
17