How To Use - Ufesa STEAM TRAVEL PV0500 Bedienungsanleitung

BEFORE THE FIRST USE
Before using the steam iron, please ensure you read the user manual and understand all parts and
features of the steam iron. Be sure to remove any packaging material and labels before using for the first
time.
In the first use they can break o odors or fumes that sent quickly. Do not spray for the first time on
clothes and there may be traces of dirt on the soleplate

HOW TO USE

Always check whether a label with ironing instructions is attached to an article to be ironed. Follow these
instructions in all cases.
Turn the temperature control dial round to set the appropriate temperature indicated in ironing
instructions or in fabric label.
Marking
. (1 dot)
. . (2 dots)
... (3 dots) / MAX
Insert the main plug into the wall socket. The indicator light will turn on. Once the selected temperature
is reached, the light will turn o , indicating you may start ironing.
WATER TANK FILLING
Unplug the iron before filling the water tank.
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix tap
water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively
(distilled water: tap water). Check with your water supplier to determine the type of water in your area.
Never use 100% distilled or demineralized, rain water, softened water, scented water, water from other
appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water.
Open the cover for filling.
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water.
The water tank should be emptied after each use.
STEAM IRONING
Set the temperature control dial to the desired position in accordance with the manufacturer's label. The
indicator light will turn on until the temperature is reached. Then the indicator light will turn o .
Set the variable steam control to the desired position.
CAUTION: Avoid coming in contact with ejected steam.
DRY IRONING
The steam iron can be used on the dry setting with or without water in the water tank, it is best to avoid
having the water tank full while dry ironing.
Turn the variable steam control to the minimum position.
Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it
with water until the steam iron cools down.
Material, for example
Acetate, elastane, polyamide, polypropylene
Cupro, polyester, silk, triacetate, viscose, wool
Cotton, linen
15