Before The First Use; Filling The Water Tank; Setting The Temperature - Ufesa PV3600 almeria Bedienungsanleitung

BEFORE THE FIRST USE

Before using the iron, please ensure you read the user manual and understand all parts and features of
the iron. Be sure to remove any packaging material and labels before using for the first time.
During its first use the iron may produce certain vapours and odours that will die away after a few
minutes.
Do not spray for the first time on clothes, as there might be traces of dirt on the soleplate.

FILLING THE WATER TANK

Unplug the iron from the mains before filling the water tank.
The iron has been designed to use normal tap water. If the tap water in your area is hard or semi-hard,
mix tap water with distilled or demineralized water purchased in stores in the ratio 2:1 and 1:1 respectively
(distilled water / tap water).
You can inquire about the water hardness with your local water supplier.
Never use 100% distilled or demineralized water, rain water, softened water, scented water, water from
refrigerators and air conditioners, dryers or other types of home water preparation water.
1. Open the water inlet lid (4).
2. Slowly pour water.
3. Never fill beyond the level mark for maximum filling (6), in order to avoid spilling out of water.
4. Close the water inlet lid.
Important: The water tank should be emptied after each use.

SETTING THE TEMPERATURE

The temperature control (7) adjusts the temperature of the soleplate (8).
Always check whether a label with ironing instructions is attached to the article to be ironed. Follow the
instructions in all cases.
Turn the temperature control to set the temperature indicated in ironing instructions or in fabric label.
Temperature control (7)
Insert the plug into the wall socket. The pilot light (9) switches on while the iron is heating up and goes
out as soon as the set temperature is reached.
•
••
•••
max
Suitable for
synthetics
silk, wool
cotton
linen
19