Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
give
•
Install your child restraint system at the seating positions arranged
btain
in the 'Universal' category in the users' manual, using the primary path
mer
of the belt.
•
Do not use load-bearing contact points other than those described in
the instructions and marked on the restraint system.
•
Always give preference to rear seats, even if the highway code allows
installation at the front.
this
•
Always make sure that the car seatbelt is fastened.
hese
•
Always check that there is no food debris or other such matter in the
ling,
buckle.
that
•
In winter take care not to secure the child in with clothes that are too
roup
bulky.
).
WITH
Your Group 0+
1. Shell
st be
. Cover
e us-
3. Shoulder strap
hicle
. Ergonomic handle
. Sun canopy
taut,
. Support pillow
that
. Belt pad
. Lap belt guide (x)
es in
. Harness buckle
10. Harness release button
t ap-
11. Crotch strap
ticu-
1. Adjustment strap
stal-
13. Diagonal belt guide
t get
In-car installation
WARNING ! Do not install your Group 0+ seat on the front seat of a ve-
e.
hicle fitted with an AIRBAG. Always position your Group 0+ seat facing
o the
rearwards.
Place the child seat on the front or back seat of your vehicle, always fac-
ing rearwards, with the handle in the vertical position (3).
com-
Buckle the belt (4).
ur of
Pull out the seat belt and pass the lap section through the side guides
(5)
(6). Pull and pass the diagonal section of the belt behind the car seat,
seat,
and slide it into the guide at the back of the shell
belt is not twisted and stretch it as tightly as possible (9).
(2)
1
(7)
(8). Ensure that the
GB
Werbung
Inhaltsverzeichnis
