Control Board - EuroLite LED-TMH-S180 Bedienungsanleitung

Control Board

The Control Board offers several features: you can easily set the starting address or run the pre-
programmed program.
Press OK until the display is lit. Browse through the mode menu by pressing the arrow buttons (up and
down). Press OK 2 x in order to select the desired menu. Browse through the main menu by pressing the
arrow buttons up and down. Press OK to enter the respective menu item of the main menu. You can change
the selection by pressing the arrow buttons (left and right). Press OK in order to confirm. You can leave
every mode by pressing the arrow buttons (left and right). The functions provided are described in the
following sections.
Default settings shaded.
Mode menu Main menu
Run mode
DMX address
Channel mode
Invert PAN
Set Invert TILT
Swap PAN-TILT
Encoder PAN-TILT
No DMX signal
Display power save
Load default
Manu PAN ...
Ver
DMX monitor
System errors
Sys
Total fixture hours
Partial fixture hours
Advan
180°
°C
EN
Set
Run Mode
DMX mode
This mode allows the unit to be controlled via every standard DMX controller.
Sound
With this function, you can run the internal program sound-controlled.
Random auto mode
With this function, you can run the random internal program.
Auto mode
With this function, you can run 4 different internal programs.
DMX address setting
With this function, you can adjust the desired DMX address via the Control Board.
DMX channel mode
With this function, you can select the desired DMX channel mode.
Sub menu
DMX/Sound/Random/
Auto 1 - 4
001~ 512
13 CH/15 CH
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Keep/clear
ON/OFF
PAN = XXX ...
29/36
Function
DMX mode / music control / random auto
program / auto program 1 - 4
DMX address setting
DMX channel mode
Reverse movement
PAN-TILT swap
Automatic PAN/TILT adjustment
Action if no DMX
Display turn off
Restore factory settings
Manual adjustment
Software version
Current DMX address of the channels
Error message
Fixture running time
Power on running time
Only service function for producer
Display reverse 180 degree
Inside temperature
Display language select - English/Chinese
00138072, Version 1.0