Product Features - EuroLite LED-TMH-S180 Bedienungsanleitung

Product features

LED moving head spot with 200 W LED, rotating gobos, color wheel, prism and QuickDMX port
• Equipped with a white 200 W COB LED
• DMX-controlled operation or stand-alone operation with Master/Slave function
• Internal programs+
• Rotating 3-facet prism
• Exact positioning via 16 bit PAN/TILT movement resolution
• Strobe effect with adjustable speed
• Random strobe effect
• Motorized focus
• Electronic dimmer
• Automatic position correction
• Lightbeam with 10° radiation angle
• Supports QuickDMX - the wireless DMX system from Eurolite
• Compatible with CRMX by LumenRadio und WDMX by Wireless Solution
• Built-in phantom-powered USB port for QuickDMX, CRMX and WDMX receivers (optional)
• Control board with LCD and foil-keyboard for adjusting the DMX-starting address, PAN/TILT-Reverse,
Program
• P-Con terminals for power linking up to 8 units
• Switch-mode power supply for operation between 100 and 240 volts
• Additional rubber feet when the spot shall be positioned on the floor
• LED: 1 x COB (chip-on-board) 200 W cold white (CW)
• Color wheel 8 dichroic filters plus open, rainbow effect with adjustable speed
• Gobo wheel with rotating gobos, 7 gobos and open, shake effect
• Gobos changeable
• Slot-in gobo system for exchanging gobos without tools
• Can be operated in 13; 15 CH mode
• The device is cooled by cooling fan
• Controlling by Stand-alone; DMX; QuickDMX via USB (optional); W-DMX by wireless solution (optional);
CRMX by LumenRadio (optional); Sound to light via Microphone
• Is in Light J Software; EUROLITE LED PC-Control 512 software already pre programmed
• Flicker-free projection
• Effect: Multi beam effect; gobo effect
21/36 00138072, Version 1.0