Inhaltsverzeichnis
Werbung
OB-8 MIDI Implementation
Page 4
BYTE 24 :
PWM VIB DELAY(6 BITS)
:PWM DLY:
PWM
:INVERT.: QUANT:
BYTE 25 :
VOICE DETUNE (6 BITS)
: EXPO
: CONST.:
: PORT. : PORT. :
BYTE 26 :
BEND AMOUNT
(6 BITS)
:LFORA TE:
Ft1
: DELAY : QUA~T :
MODE
The 08-8 defaults to OMNI ON upon power up. If the 08-8 is a receiver,
it will receive on all channels.
If the 08-8 is the transmitter, it will
transmit on one channel. (selectable)
The 08-8 may also be operated in OMNI OFF mode. If the OB-8 is a
receiver, it will now receive ONLY on the selected Basic Channel. If the OB-
8 is used as transmitter, it will now transmit the upper half of the
keyboard on the Basic Channel, and the lower half
w
ì
lI be transmitted on the
Basic Channel
+
l. Pitch bend, progam select, etc. will be transmitted on
both channels.
The Channel Split Point is the same as the regular Split
Point.
(default is middle C.)
THIS MODE IS INDEPENDENT OF SPLIT MODE.
The 08-8 is always in POLY MODE.
Oberheim Electronics, Inc.
Los Angeles, CA 90064 USA
p/n 950028
Werbung
Inhaltsverzeichnis
