Konig Electronic SEC-TRANS30 Installationsanleitung Seite 6

Monitor
1. Pull-out antenna
2. Monitor
3. AV input jack connector
4. AV output jack connector
1. Slide the antenna (1) upwards from the rear of the monitor.
2. Place the monitor on its support (6) on a stable surface.
The monitor can also be mounted on an adjustable support (order separately with art. nr.
SEC-BRACK40) which can be mounted at the bottom of the monitor and fitted with 3 screws on a
horizontal or vertical surface.
3. Insert the DC plug into the DC 12V input jack connector (5).
4. Insert the AC/DC adapter into the wall socket.
5. You can connect an extra monitor to the AV output connector (4).
5. DC 12V input jack connector
6. Support
7. Fitting point for adjustable support
6