Sony VPL-CX76 Kurzreferenz Seite 17

Projecting
Connecting the Projector/Projecting
When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the plug,
not the cable itself.
Refer also to the instruction manual of the computer to be connected.
Connecting with a computer
Wired connection
1 Connect the AC power cord to a wall outlet and connect the computer and the projector.
2 Press the ?/1 (on/standby) key.
3 Turn on the computer connected to the projector.
4 Press the INPUT key to select the input source.
5 Set it to output the signal to only the external monitor.
4
Input A
4
Input B*
INPUT
Video
S Video
* VPL-CX76 only
2
2
1
1
3
3
Power
F7 or Fx
5
5
+
Fn
Projecting
5