Product Description And Specifications; Intended Use; Product Features - Bosch GCM 18V-216 DC Professional Originalbetriebsanleitung

34 | English
Symbols and their meaning
sary to use reducers, ensure that the di-
mensions of the reducer are suitable for
the base blade thickness and the saw
blade hole diameter, as well as the tool
3 601 M47 0B.
spindle diameter. Wherever possible, use
the reducers provided with the saw
25,4
blade.
The saw blade diameter must match the
information specified on the symbol.
Shows the rotational direction of the SDS
bolt for tightening the saw blade (anti-
clockwise) and for loosening the saw
blade (clockwise).
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
®
With the Bluetooth Low Energy Module GCY 42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
less technology.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Slide device
(1)
(2) Chip ejector
(3) Transport handle
(4) Depth stop adjusting screw
(5) Guide roller
(6) Cover for GCY 42 Bluetooth
(7) Lock-off function for on/off switch
(8) On/off switch
(9) Handle
(10) Laser protection cap
1 609 92A 7ED | (21.12.2021)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
(31)
(32)
(33)
(34)
(35)
(36)
(37)
(38)
(39)
(40)
(41)
(42)
®
wire-
(43)
(44)
(45)
(46)
(47)
(48)
(49)
(50)
(51)
(52)
®
Low Energy Module
(53)
(54)
(55)
(56)
(57)
Protective guard
Retracting blade guard
Saw blade
Saw table extension
Fence
Adjustable fence
Saw table
Clamping lever of the saw table extension
Scale for mitre angles
Insert plate
Locking clamp
Locking knob for various mitre angles
Mitre pre-setting lever
Tilt protector
Laser warning label
Angle indicator for mitre angles
Detents for standard mitre angles
Mounting holes
Recessed handles
Screw clamp
Standard bevel angle stops 45°, 22.5° and 33.9°
Scale for bevel angle
Angle indicator for right-hand bevel angle range
Clamping handle for various bevel angles
Depth stop
Locking screw for slide device
User interface
Transport safety lock
a)
Rechargeable battery
Rechargeable Battery release button
Angle indicator for left-hand bevel angle range
Chip deflector
Stop for standard 0° bevel angle
Hex key (5 mm/2.5 mm)
Holes for screw clamp
Length stop
Locking screw for length stop
Clamping screw for length stop
Temperature indicator (user interface)
ECO mode indicator (user interface)
Power tool status indicator (user interface)
Laser indicator (user interface)
Worklight indicator (user interface)
Laser/worklight on/off button (user interface)
Speed setting/mode indicator (user interface)
Speed preselection button (user interface)
a)
Dust bag
a)
Bosch Power Tools