Operation; General Information; Rotary Switch - Conrad CM5400C-GS Bedienungsanleitung

11. Operation

a) General information

Rotary switch

Switch position
Indicators
Indicator
glows steadily
flashes
glows steadily
and flash
Filter holder and filter
• Remove and insert filter holder (6)
To remove: The filter holder (6) can be removed by turning the handle into the
To insert: Use the handle to align the filter holder (6) with the
aligned with the
• Remove and insert filter (7)
Align the recess on the filter (7) with the recess on the filter holder (6) and insert the filter (7) into the
filter holder (6). The top edge of the filter (7) must be flush with the top edge of the filter holder (6). Turn the filter (7)
a quarter turn to prevent it from falling out in the filter holder. The filter (7) can be removed by turning it so that the
recess is aligned with the recess on the filter holder (6).
Make sure you wipe clean the top edge of the filter holder (6) from coffee before inserting it.
Water tank
• The water tank (13) has a capacity of approx. 1.25 litres and can be removed from the machine for easier filling
and cleaning.
• Always hold the water tank by the handle (14) when lifting it off.
• Insert the water tank back into the machine from above after you have cleaned it or filled with water. It must be flush
with the guides on the machine and the valve must click into place on the machine bottom.
24
Function
Standby
Coffee preparation
Steam production
Function
Appliance is switched on
Appliance heats up
Appliance has reached operating temperature
Appliance needs to be descaled
marking on the appliance.
position and pulling it downwards.
marking on the appliance and turn it until it is