Sony VPL-XW5000 Installationsanleitung Seite 7

Hot and humid
Locations subject to direct cool or warm air from
an air-conditioner
Installing the unit in such a location may cause a
malfunction of the unit due to moisture
condensation or rise in temperature.
Near a heat or smoke sensor
Malfunction of the sensor may occur.
Very dusty and extremely smoky locations
Unsuitable Conditions
Do not do any of the following while using the
unit.
Tilting front/rear and left/right
Avoid using the unit tilted at an angle, as shown in
the following illustrations.
Do not install the unit anywhere other than on a
level surface or on the ceiling. Installing the unit in
such a location may result in uneven color
uniformity.
If the unit is tilted up or down, the image on the
screen may be trapezoidal. Position the unit so
that the lens is parallel to the screen.
15° or
more
15° or
more
When installing the unit at high altitudes
When using the unit in a location at an altitude of
1,000 m (approx. 3,280 feet) or higher,
appropriately set "High Altitude Mode" in the
Setup menu. Failing to do so could have
adverse effects, such as reducing the reliability of
certain components.
Safety precautions for installing the unit on
a ceiling
Never mount the projector on the ceiling or

move it by yourself. Be sure to consult with
qualified Sony personnel (charged).
When installing the unit on a ceiling, be sure to

use a safety wire, etc., to prevent the unit from
falling. Entrust the installation to an experienced
contractor or installer.
For dealers
Be sure to secure the cabinet cover firmly when
installing to the ceiling firmly.
15° or more
10° or
more
10° or
more
7
GB