Using The Heater - HOMCOM 820-246V70 Montageanleitung

25. The use of attachments or accessories not recommended or sold by the product
distributor may cause personal or property hazards or injuries.
26. This product is intended for normal domestic/household use only.
Use this heater as described in this manual. Any other uses, not recommended by
the manufacturer, may cause fire, electric shock, or injury to persons and may
void the warranty.
KNOW THE HEATER
1
2

USING THE HEATER

1. Before inserting the plug into an electrical outlet, make sure that the electrical
supply in your area matches that on the rating label of the unit.
2. When plugged in, turn on the Main power switch
3.When in Standby mode, only press
touch, and the LED display shows the room temperature. Press
rest of the control panel.
(a) Low Power: About 1200W (Press
(b) High Power: About 2000W ( Press
(c)TIMER: Press this button
will turn itself off (From 0 hour -12 hours)
3
4
5
6
on the control panel will respond to your
to switch it, one
to switch it, two
repeatedly to set a period after which the heater
3
1. Air outlet
2. Control panel
3. Handle
4. Air inlet
5. Main switch
6. Power cord
at the back of the unit.
to access the
light on )
light on together )
EN