Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating- and Installation Instructions Hans Wilms GmbH & Co. KG
Operating- and Installation Instructions Hans Wilms GmbH & Co. KG
Operating- and Installation Instructions Hans Wilms GmbH & Co. KG
Gas Heaters Model Series GH 40 TH / GH 55 TH / GH 75 TH / GH 105 TH
Operating- and Installation Instructions Hans Wilms GmbH & Co. KG
Gas Heaters Model Series GH 40 TH / GH 55 TH / GH 75 TH / GH 105 TH
Gas Heaters Model Series GH 40 TH / GH 55 TH / GH 75 TH / GH 105 TH
Gas Heaters Model Series GH 40 TH / GH 55 TH / GH 75 TH / GH 105 TH
Set main switch to ‚0' and close gas supply. The device will automatically run for
Set main switch to ‚0' and close gas supply. The device will automatically run for
Set main switch to ‚0' and close gas supply. The device will automatically run for
the mains voltage may be disconnected
Set main switch to ‚0' and close gas supply. The device will automatically run for
the mains voltage may be disconnected
the mains voltage may be disconnected
the mains voltage may be disconnected
During a longer standstill the unit has to be disconnected from electrical- and gas supply, packed
During a longer standstill the unit has to be disconnected from electrical- and gas supply, packed
During a longer standstill the unit has to be disconnected from electrical- and gas supply, packed
dust-proof but not air-proof (condensation humidity), and the gas connection has to be sealed
During a longer standstill the unit has to be disconnected from electrical- and gas supply, packed
dust-proof but not air-proof (condensation humidity), and the gas connection has to be sealed
dust-proof but not air-proof (condensation humidity), and the gas connection has to be sealed
against dust and dirt.
dust-proof but not air-proof (condensation humidity), and the gas connection has to be sealed
against dust and dirt.
against dust and dirt.
against dust and dirt.
In order to guarantee the operating safety and to achieve a maximum economic efficiency the gas heater
In order to guarantee the operating safety and to achieve a maximum economic efficiency the gas heater
In order to guarantee the operating safety and to achieve a maximum economic efficiency the gas heater
has to be serviced and cleaned in reasonable periods.
In order to guarantee the operating safety and to achieve a maximum economic efficiency the gas heater
has to be serviced and cleaned in reasonable periods.
has to be serviced and cleaned in reasonable periods.
has to be serviced and cleaned in reasonable periods.
For this the following must be considered:
For this the following must be considered:
The check of the safety devices may only be done by competent or authorized
For this the following must be considered:
The check of the safety devices may only be done by competent or authorized
personnel.
The check of the safety devices may only be done by competent or authorized
personnel.
personnel.
The gas heater, especially safety thermostat, thermo element, burner, ignition electrode and fan, have to
The gas heater, especially safety thermostat, thermo element, burner, ignition electrode and fan, have to
The gas heater, especially safety thermostat, thermo element, burner, ignition electrode and fan, have to
be checked in reasonable periods for dirt and if necessary have to be cleaned.
The gas heater, especially safety thermostat, thermo element, burner, ignition electrode and fan, have to
be checked in reasonable periods for dirt and if necessary have to be cleaned.
be checked in reasonable periods for dirt and if necessary have to be cleaned.
Do not use water for cleaning!
be checked in reasonable periods for dirt and if necessary have to be cleaned.
Do not use water for cleaning!
Do not use water for cleaning!
Use original spare parts only!
Do not use water for cleaning!
Use original spare parts only!
Use original spare parts only!
Repair work on electrical- and gas-carrying components may only be done by experts!
Use original spare parts only!
Repair work on electrical- and gas-carrying components may only be done by experts!
Repair work on electrical- and gas-carrying components may only be done by experts!
Note the enclosed electrical wiring diagrams.
Repair work on electrical- and gas-carrying components may only be done by experts!
Note the enclosed electrical wiring diagrams.
Note the enclosed electrical wiring diagrams.
Should you notice or anticipate a gas leak, immediately close the gas supply, switch the unit off and
Note the enclosed electrical wiring diagrams.
Should you notice or anticipate a gas leak, immediately close the gas supply, switch the unit off and
Should you notice or anticipate a gas leak, immediately close the gas supply, switch the unit off and
have it checked by an expert.
Should you notice or anticipate a gas leak, immediately close the gas supply, switch the unit off and
have it checked by an expert.
have it checked by an expert.
Should the unit be left in an unsafe condition, it has to be separated from the electrical- and gas supply
have it checked by an expert.
Should the unit be left in an unsafe condition, it has to be separated from the electrical- and gas supply
Should the unit be left in an unsafe condition, it has to be separated from the electrical- and gas supply
and has to be clearly marked as defective!
Should the unit be left in an unsafe condition, it has to be separated from the electrical- and gas supply
and has to be clearly marked as defective!
and has to be clearly marked as defective!
Warm air heaters have to be checked according to the using condition, minimum however once a year
and has to be clearly marked as defective!
Warm air heaters have to be checked according to the using condition, minimum however once a year
Warm air heaters have to be checked according to the using condition, minimum however once a year
by an expert for safe condition. The results have to be written down and kept until the next check.
Warm air heaters have to be checked according to the using condition, minimum however once a year
by an expert for safe condition. The results have to be written down and kept until the next check.
by an expert for safe condition. The results have to be written down and kept until the next check.
by an expert for safe condition. The results have to be written down and kept until the next check.
Manuals are available from
Manuals are available from
Manuals are available from
Hans Wilms GmbH & Co. KG
Manuals are available from
Hans Wilms GmbH & Co. KG
Hans Wilms GmbH & Co. KG
www.wilms.de
Hans Wilms GmbH & Co. KG
www.wilms.de
www.wilms.de
www.wilms.de
9.1 Electrode adjustment
9.1 Electrode adjustment
9.1 Electrode adjustment
9.1 Electrode adjustment
8. Stopping
8. Stopping
8. Stopping
Before any transport the gas heater must be completely cooled down.
Before any transport the gas heater must be completely cooled down.
Before any transport the gas heater must be completely cooled down.
Before any transport the gas heater must be completely cooled down.
For this the following must be considered:
The check of the safety devices may only be done by competent or authorized
personnel.
Pull the main plug and close gas supply during service.
Pull the main plug and close gas supply during service.
Pull the main plug and close gas supply during service.
Pull the main plug and close gas supply during service.
8. Stopping
9. Service
9. Service
9. Service
9. Service
42 of 62
42 of 62
42 of 62
42 of 62
approx
20 seconds, before
approx
approx
20 seconds, before
20 seconds, before
approx
20 seconds, before
Werbung
