Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating- and Installation Instructions Hans Wilms GmbH & Co. KG
Operating- and Installation Instructions Hans Wilms GmbH & Co. KG
Operating- and Installation Instructions Hans Wilms GmbH & Co. KG
Gas Heaters Model Series GH 40 TH / GH 55 TH / GH 75 TH / GH 105 TH
Gas Heaters Model Series GH 40 TH / GH 55 TH / GH 75 TH / GH 105 TH
Gas Heaters Model Series GH 40 TH / GH 55 TH / GH 75 TH / GH 105 TH
5.1 Environmental conditions
5.1 Environmental conditions
5.1 Environmental conditions
All work provided for in this chapter has to be executed exclusively from qualified
All work provided for in this chapter has to be executed exclusively from qualified
experts: mechanical work from trained technicians, electric work from skilled
All work provided for in this chapter has to be executed exclusively from qualified
experts: mechanical work from trained technicians, electric work from skilled
electricians.
experts: mechanical work from trained technicians, electric work from skilled
electricians.
electricians.
Ambient temperature:
Ambient temperature:
Ambient temperature:
Humidity:
Humidity:
Humidity:
Maximum altitude:
Maximum altitude:
Maximum altitude:
Not allowed in the area:
Not allowed in the area:
Not allowed in the area:
The operation in fire- and explosion-endangered surroundings is inadmissible
The operation in fire- and explosion-endangered surroundings is inadmissible
The operation in fire- and explosion-endangered surroundings is inadmissible
In order to avoid damages to persons and material the local construction-, fire-
In order to avoid damages to persons and material the local construction-, fire-
and labour union directives must be observed.
In order to avoid damages to persons and material the local construction-, fire-
and labour union directives must be observed.
and labour union directives must be observed.
Before installation of the device make sure that the local supply conditions
Before installation of the device make sure that the local supply conditions
(Type of gas, pressure) and the current setting of the heater match.
Before installation of the device make sure that the local supply conditions
(Type of gas, pressure) and the current setting of the heater match.
(Type of gas, pressure) and the current setting of the heater match.
The heater may not be used for heating of habitable rooms in buildings! For use
The heater may not be used for heating of habitable rooms in buildings! For use
in public buildings the local regulations must be observed!
The heater may not be used for heating of habitable rooms in buildings! For use
in public buildings the local regulations must be observed!
in public buildings the local regulations must be observed!
To comply with the MAK limit a fresh air amount of minimum 25 m³/h must be guaranteed per KW heat
To comply with the MAK limit a fresh air amount of minimum 25 m³/h must be guaranteed per KW heat
capacity.
To comply with the MAK limit a fresh air amount of minimum 25 m³/h must be guaranteed per KW heat
capacity.
capacity.
The installation of pipes, tubes or similar as well as changes of the diameter on air outlet and air inlet is not
The installation of pipes, tubes or similar as well as changes of the diameter on air outlet and air inlet is not
allowed.
The installation of pipes, tubes or similar as well as changes of the diameter on air outlet and air inlet is not
allowed.
allowed.
A sufficient distance to flammable objects and parts especially in direction of the air outlet must be strictly
A sufficient distance to flammable objects and parts especially in direction of the air outlet must be strictly
observed and has to be checked before start-up.
A sufficient distance to flammable objects and parts especially in direction of the air outlet must be strictly
observed and has to be checked before start-up.
observed and has to be checked before start-up.
As upper, lower, side and rear safety distance 1.5 m should not be reduced. In discharge direction 3.0 m
As upper, lower, side and rear safety distance 1.5 m should not be reduced. In discharge direction 3.0 m
should not be reduced.
As upper, lower, side and rear safety distance 1.5 m should not be reduced. In discharge direction 3.0 m
should not be reduced.
should not be reduced.
5. Installation / Assembly
5. Installation / Assembly
5. Installation / Assembly
Operation: -20°C up to +50°C
Operation: -20°C up to +50°C
Operation: -20°C up to +50°C
Storage: -25°C up to +65°C
Storage: -25°C up to +65°C
Storage: -25°C up to +65°C
5% up to 95% relative humidity
5% up to 95% relative humidity
5% up to 95% relative humidity
<1.000m
<1.000m
<1.000m
Dust, steam, corrosive or
Dust, steam, corrosive or
flammable gases, oil mist,
Dust, steam, corrosive or
flammable gases, oil mist,
dripping water
flammable gases, oil mist,
dripping water
dripping water
39 of 62
39 of 62
39 of 62
Werbung
