Laser Safety; Fire Safety - ATOMSTACK P7 Serie Installationshandbuch

Part 2：User Security Statement
Laser Light can hurt the human eyes and skin. Do not expose the eye or skin to laser light directly. This Laser product has an optical lens and
emits a collimated laser beam. The light from this product, either direct or reflected is very harmful as it can propagate a long distance while
maintaining high optical density. When handling the product, must wear appropriate safety glasses (OD5+) to protect eyes from laser light
including reflected and stray light. The reflected and stray light spilling into an unintended area should be attenuated and/or absorbed.

2.1 Laser safety

We installed a laser shield on the laser, the shield can largely filter out the diffuse reflection of the laser spot. However, when using laser
engraving machine, it is recommended that you wear laser protective glasses. Avoid skin exposure to type 4 laser beams, especially at the
closed distance.Teenagers must have parental supervision in the process of using it. Do not touch the laser engraving module when the
machine is activated.

2.2 Fire safety

Because cutting burns off the substrate, a high-intensity laser beam generates extremely high temperatures and a lot of heat.Certain
materials can catch fire during cutting, creating gases and fumes inside the equipment.A small flame usually appears here when a laser beam
hits the material.It will move with the laser and will not stay lit when the laser passes by. Please do not leave the machine unattended during
the carving process. After use, be sure to clean up debris, debris and flammable materials in the laser cutting machine. Keep a working fire
extinguisher nearby at all times.Smoke or air pollutant safety. When laser engraving machines are used, smoke, vapour, particles, and
potentially highly toxic materials (plastics and other combustible materials) are produced from the material.These fumes or air pollutants can
be hazardous to health.