ATOMSTACK P7 Serie Installationshandbuch Seite 14

1
laser module
4
connection cable
Step 5
Cable assembling
2
5
1. According to the figure, insert the 6PIN
terminal of the Y-axis connection line into the
XH6 interface of the Y-axis motor in the
direction of the arrow.
2. According to the figure, insert the 4PIN
terminal of the laser module cable into the XH4
interface of the adapter board and insert the
7PIN terminal of the control box cable into the
XH7 interface of the adapter board in the
direction of the arrow.
3. Follow the arrow direction in the figure.
Insert the 4PIN terminal of the control box
connection line into the 4PIN terminal interface
of the Y-axis connection line.
4. According to the figure, insert the 3PIN
terminal of the laser module cable into the XH3
interface of the laser module in the direction of
the arrow.
5. Insert the 6PIN terminal of the control box
cable into the XH6 terminal interface of the X
axis motor in the direction of the arrow shown
3
in figure.