Troubleshooting - Honda HS622 Bedienungsanleitung

09/08/27 14:52:57 3C743720_061
When the engine will not start:
1. Is there enough fuel?
2. Is the fuel valve on?
3. Is gasoline reaching the carburetor?
To check, loosen the drain knob with the fuel valve on. Fuel should
flow freely.
Gasoline is extremely flammable, and gasoline vapor can explode.
If any fuel is spilled, make sure the area is dry before starting the
engine. Spilled fuel or fuel vapor may ignite.
4. Is the engine switch on?
5. Check the spark plug for dirt, wet and the gap.
a. Clean the spark plug.
b. Reinstall the plug if it is reused, or replace with a new one.
6. If the engine still does not start, take the snowblower to an
authorized Honda dealer.
When the auger or blower does not operate:
Check the lock bolts and replace if broken off with the wrench handle.
Secure the lock bolts with 6 mm nuts.
Spare lock bolts and nuts are supplied with the snowbolwer.
NUT
LOCK BOLT
11.

TROUBLESHOOTING

WRENCH
HANDLE
59