Honda HS622 Bedienungsanleitung Seite 22

09/08/27 14:46:27 3C743720_021
Snow drop bar
If the snow discharge chute or snow blowing mechanism becomes
clogged, stop the engine and use this bar to unclog them.
After unclogging, wipe the bar clean, and store it in the holders.
Before removing clogged snow, be sure to stop the engine, and make
sure that all rotating parts have come to a complete stop. Remove the
spark plug cap from the spark plug.
Headlight switch
The switch turns the headlight, low beam, high beam and OFF.
To turn the headlight on, it is necessary to start the engine first. It will
remain off while the engine is off.
HIGH BEAM ---
LOW BEAM ---
OFF ---
(ETS, HTS, HT, HW, LW, TCS)
HIGH BEAM
LOW BEAM
OFF
SNOW DROP
BAR
HEADLIGHT SWITCH
19