Honda HS622 Bedienungsanleitung Seite 24

09/08/27 14:46:44 3C743720_023
Handle height adjusting bolt
The handlebars can be set in the high, low or middle position to suit
the operator. To change handlebar height, remove the right and left
adjusting bolts, align the bolt holes for the desired handlebar height,
and reinstall the bolts. Tighten the nuts securely.
Skid plate, scraper
Adjust the skid plates and scraper for the auger housing ground
clearance best suited to your snow removal conditions. (See page
SCRAPER
HANDLE HEIGHT
ADJUSTING BOLT
SKID PLATE
35 )
21