EBECO EB-Therm 55 Handbuch Seite 28

Temperature
Regulating function
EB-Therm 55 regulates the
temperature via a sensor in the floor
that measures the temperature and
regulates the heating accordingly.
Set the temperature required
Change the floor temperature by
turning the knob. Min. position on the
control corresponds to 10 °C, max.
position corresponds to 45°C. An ap-
propriate setting is usually between 2
and 3.
The temperature does not stabilise
until the underfloor heating system
has been on for a few days. It might
then be necessary to adjust the
thermostat's setting.
Indication
The colours on the on/off switch show
the current status for EB-Therm.
Red light - the thermostat is on and
the underfloor heating is activated.
Green light- the thermostat is on and
the underfloor heating is switched off.
Delay between turning off and on
There is a built-in delay in order to
avoid unnecessary wear and tear on
26