Drive Installation - Icy Box IB-3804-C31 Handbuch

Drive installation

Before the installation
Note!
Before installing the hard drive, please disconnect the power plug from the outlet or turn off each drive bay
individually. It may cause electric shock accident or malfunction.
When connecting the hard drive, please note the electrostatic! Body's static electricity may cause malfunction
of the device. Please touch the metal objects to discharge or wear the antistatic gloves before the operation.
Attention!
PCB of this device and HDDs are precision machinery, please be careful do not collision and please notice
the direction of HDD
Be careful the cutting edge inside may cut hand!
If hard disk already contains data, please backup data before installation to prevent data loss.
- Open the front door (make sure the lock is unlocked.).
- Insert the HDD into the corresponding slot.
Attention: Please notice the direction of HDD!
- Close the front door until it has been locked and the HDD locks into the connector.
If required, the door of each drive bay can be locked.
- To remove a hard disk, carefully pull the handle of the front flap forward and loosen the internal connection
of the hard disk so that you can then remove the drive.
Note:
- To protect the drives and the device, you can turn off each drive bay individually without disconnecting
the other drives when you add or remove a drive.
- Connect the power adapter and connect the USB cable to your computer and power on the device via
power switch of the power supply at the rear side.
If the drive bays without hard disks are switched on, the corresponding LED lights up red.
If drive bays with inserted hard disks are switched on, the corresponding LED lights up blue.
During access, the corresponding LED flashes purple
DISK INITIALISATION
About data security
To protect your files and help prevent the loss of your data, we strongly recommend that you keep two copies
of your data, one copy on your IB-3804-C31 and a second copy either on your internal drive or another
storage media such as CD, DVD, Tape or an additional external drive.
Any loss or corruption of data while using the IB-3804-C31 is the sole responsibility of the user, and under
no circumstances will the manufacturer be held liable for compensation or the recovery of this data.