Product Overview; Drive Installation - Icy Box IB-382H-C31 Handbuch

Product overview

1.
1. Power supply connection
2. ON/OFF switch
3. Type-C connection to host computer
®
4. USB 3.1 (Gen2) Type-C
5. Two USB 3.1 (Gen2) Type-A ports
Key Features
• Type-C enclosure for 2.5'' or 3.5'' HDD/SSD
®
• Integrated hub with 1x USB Type-C
• All ports with USB 3.1 (Gen2) up to 10 Gbit/s
• SATA III up to 6 Gbit/s
• Plug & Play and HotSwap
• High-grade aluminium housing

Drive Installation

This device supports only M.2 PCIe NVMe SSDs with M.2 M-Key!
1. Unscrew the two black screws of the back panel on the back side of the
enclosure with the delivered screw driver.
2. Remove the inner frame of the enclosure.
3. Carefully insert your HDD or SSD into the SATA connector of the frame.
4. Screw your HDD or SSD to the frame from the side using the provided
screws.
5. Slide the frame, including the installed drive, into the aluminium housing.
6. Fix the back panel with the two black screws using the provided screw
driver. Pay attention to the correct alignment of the back panel.
Manual IB-382H-C31
2. 3.
®
4.
port
, 2x USB Type-A
®
5.